20% BETTER PERFORMANCE: With its improved composition, the ARCTIC MX-6 has a measurably lower thermal resistance than the MX-4
PROVEN QUALITY: With over 20 years of experience in the PC cooling market, our focus was on improved performance, versatile application possibilities and an easy-to-use consistency
RISK-FREE APPLICATION: MX-6 is neither electrically conductive nor capacitive. This eliminates the risk of short circuits or discharges
VERSATILE APPLICATION: With its new composition, the MX-6 is suitable for many application scenarios. Thanks to its viscosity, it is also suitable for direct-die cooling scenarios for GPUs of graphics cards or console processors
100 % ORIGINAL DUE TO AUTHENTICITY CHECK: Due to our Authenticity Check, the authenticity of each individual product can be verified

---

From the manufacturer

Simply the Paste

The ARCTIC MX-6 is a carbon filler-based thermal paste and reaches its maximum performance without burn-in, directly after application and distribution. It achieves all of this without any reputed ingredients, such as expensive diamond dust or various precious metal particles. The silicone gel used as a carrier enables optimal distribution, which is achieved through even contact pressure, for example when mounting the heat sink.

20 % better performance With its improved composition, the ARCTIC MX-6 has a measurably lower thermal resistance than the MX-4. The basis for calculation is the temperature difference between the cooler base and the heat source (in C) in relation to the applied heat load (in W), which also results in the unit C/W. The higher the thermal resistance, the worse the heat can be transferred through the TIM layer. Thermal insulators, as an example, therefore always have a particularly high thermal resistance, while thermal interface materials usually have a particularly low one.	Proven quality We are proud of our thermal pastes. With over 20 years of experience in the PC cooling market the MX-6 was developed with the goal to offer a first-class product. The optimized formula is based on the MX-4. The focus was on versatile application possibilities and an easy-to-use consistency.	Versatile range of applications With its new composition, MX-6 is the suitable thermal compound for many application scenarios. Excellent non-drying and non-bleeding properties ensure consistent long-term performance. Its viscosity prevents leakage due to the pump-out effect. It’s also suitable for direct-die cooling scenarios which occur, for example, with graphics cards or console processor GPUs.

Often copied, but never equaled ARCTIC’s thermal pastes have always been one of the most popular products on the TIM market. To be able to ensure that a paste has been produced and filled under ARCTIC regulations and thus meets our high quality standards, we have the ARCTIC Authenticity Check. This means that every product can be reliably verified so that our customers are always on the safe side.	Easy application MX-6 is neither electrically conductive nor capacitive. This eliminates the risk of short circuits or discharges, which can cause serious damage to components if care is not taken. The thermal paste is also free of liquid metal components, which can often lead to discoloration, abrasion or corrosion damage to the radiator bottom.	Available in several versions ARCTIC MX-6 is available in package sizes from 2 to 8 grams. Resealable syringes prevent the paste from drying out and facilitate dispensing. Alternatively, the variants with MX Cleaner are available. These enable simple and residue-free cleaning of the contact surfaces. The cleaner consists of 100% Limonene, a natural substance obtained from citrus essential oil.

	MX-6	MX-6 (incl. MX Cleaner)	MX-4	MX-4 (incl. Spatula)	MX-2	MX Cleaner
Dimensions	/	/	/	/	/	115 x 115 mm
Specific Gravity	2.60 g/cm³	2.60 g/cm³	2.50 g/cm³	2.50 g/cm³	3.96 g/cm³	/
Continuous Use Temperature	-50~150 ℃	-50~150 ℃	-50~150 ℃	-50~150 ℃	0~150 ℃	/
Volume Resistivity	1.8 X 10¹² Ω-cm	1.8 X 10¹² Ω-cm	3.8 X 10¹³ Ω-cm	3.8 X 10¹³ Ω-cm	1.22 X 10¹² Ω-cm	/
Viscosity	45000 Poise	45000 Poise	870 Poise	870 Poise	850 Poise	/

From the manufacturer

Simply the Paste

The ARCTIC MX-6 is a carbon filler-based thermal paste and reaches its maximum performance without burn-in, directly after application and distribution. It achieves all of this without any reputed ingredients, such as expensive diamond dust or various precious metal particles. The silicone gel used as a carrier enables optimal distribution, which is achieved through even contact pressure, for example when mounting the heat sink.

20 % better performance With its improved composition, the ARCTIC MX-6 has a measurably lower thermal resistance than the MX-4. The basis for calculation is the temperature difference between the cooler base and the heat source (in C) in relation to the applied heat load (in W), which also results in the unit C/W. The higher the thermal resistance, the worse the heat can be transferred through the TIM layer. Thermal insulators, as an example, therefore always have a particularly high thermal resistance, while thermal interface materials usually have a particularly low one.	Proven quality We are proud of our thermal pastes. With over 20 years of experience in the PC cooling market the MX-6 was developed with the goal to offer a first-class product. The optimized formula is based on the MX-4. The focus was on versatile application possibilities and an easy-to-use consistency.	Versatile range of applications With its new composition, MX-6 is the suitable thermal compound for many application scenarios. Excellent non-drying and non-bleeding properties ensure consistent long-term performance. Its viscosity prevents leakage due to the pump-out effect. It’s also suitable for direct-die cooling scenarios which occur, for example, with graphics cards or console processor GPUs.

Often copied, but never equaled ARCTIC’s thermal pastes have always been one of the most popular products on the TIM market. To be able to ensure that a paste has been produced and filled under ARCTIC regulations and thus meets our high quality standards, we have the ARCTIC Authenticity Check. This means that every product can be reliably verified so that our customers are always on the safe side.	Easy application MX-6 is neither electrically conductive nor capacitive. This eliminates the risk of short circuits or discharges, which can cause serious damage to components if care is not taken. The thermal paste is also free of liquid metal components, which can often lead to discoloration, abrasion or corrosion damage to the radiator bottom.	Available in several versions ARCTIC MX-6 is available in package sizes from 2 to 8 grams. Resealable syringes prevent the paste from drying out and facilitate dispensing. Alternatively, the variants with MX Cleaner are available. These enable simple and residue-free cleaning of the contact surfaces. The cleaner consists of 100% Limonene, a natural substance obtained from citrus essential oil.

	MX-6	MX-6 (incl. MX Cleaner)	MX-4	MX-4 (incl. Spatula)	MX-2	MX Cleaner
Dimensions	/	/	/	/	/	115 x 115 mm
Specific Gravity	2.60 g/cm³	2.60 g/cm³	2.50 g/cm³	2.50 g/cm³	3.96 g/cm³	/
Continuous Use Temperature	-50~150 ℃	-50~150 ℃	-50~150 ℃	-50~150 ℃	0~150 ℃	/
Volume Resistivity	1.8 X 10¹² Ω-cm	1.8 X 10¹² Ω-cm	3.8 X 10¹³ Ω-cm	3.8 X 10¹³ Ω-cm	1.22 X 10¹² Ω-cm	/
Viscosity	45000 Poise	45000 Poise	870 Poise	870 Poise	850 Poise	/